Balboa-water-group VGB 2008 179 GPM Suction Flow User Manual download pdf

179 GPM Suction Flow Installation Instructions

Packaging and Installation Instructions - SAVE INSTRUCTIONS

Instructions

For multiple drain use only in self-contained factory manufactured spas.1.

Do not try to locate suction outlets on seating areas or on the brackets for such seating areas.2.

When two or more suction ﬁttings are used on a common suction line they shall be separated by a minimum of 3 ft. (91.44 cm); 3.

or, if any are located closer they shall be located on two different planes (i.e., one each on two separate vertical walls). Conﬁrm

with local and national codes and standards for proper installation.

In the event of one suction outlet being completely blocked, the remaining suction outlets serving that system shall have a ﬂow 4.

rating capable of the full ﬂow of the pump(s) for the speciﬁc suction system.

Maximum ﬂow rating with head loss curve: 179 GPM without vacuum tube.5.

Acceptable connectin6. g pipe size(s) - maximum 2.5” dia.

Mounting position: wall only7.

Suction outlet part number 30240U applicable.8.

Part numbers for 179 GPM conﬁguration: (Replace within seven installed years)9.

30240U-XX VGB 2008 256 / 179 GPM suction cover & Screw/UV

30241 VGB 2008 179 GPM wall ﬁtting x 2”S

30248 VGB 2008 179 GPM wall ﬁtting x 2.5”S

30234-V Suction L gasket use 3.75” hole size

30236-V Suction ﬂat gasket use 3.63” hole

30238-V Compensating ring

30239-V Suction nut

Tools required: Philips screw driver, glue for plumbing connections, clamp & pliers for tubing connections.10.

Service and winterizing instructions. 11.

a. Service - remove screw. Remove cover. Place suction cover on wall ﬁtting with blank portion, no holes pointed down.

The keyway on inside cover must match the notch on the wall ﬁtting. Insert stainless steel screw in cover and tighten

securely. Do not overtighten (as plastic will strip).

b. Winterizing - Drain suction line thoroughly and blow out all remaining water. See spa manufacturer instructions for

winterizing.

WARNING: Do not exceed the maximum allowable ﬂow rate stated on the suction ﬁtting.12.

The suction ﬁtting including fasteners should be observed for damage or tampering before each use of this facility. 13.

Note: The suction ﬁtting including fasteners should be observed for damage or tampering before each use of this facility.

Missing, broken, or cracked suction ﬁttings shall be replaced before using this facility. Loose suction ﬁttings shall be reattached

or replaced before using this facility. Read, then keep these instructions for future reference.

Caution: Be aware that changing pump types and sizes can increase ﬂow rate. The maximum ﬂow rate is 179 GPM

without a vacuum tube.

Patented under U.S. Patent No. 8,191,183.

42138 A May 21, 2012

1 2

Instructions 1
42138 A May 21, 2012 2

Summary of Contents

Page 1 - Instructions

179 GPM Suction Flow Installation InstructionsPackaging and Installation Instructions - SAVE INSTRUCTIONSInstructionsFor multiple drain use only in s

Page 2 - 42138 A May 21, 2012

Comments to this Manuals

No comments

Balboa-water-group VGB 2008 179 GPM Suction Flow User Manual

Browse online or download User Manual for Accessories for water Balboa-water-group VGB 2008 179 GPM Suction Flow. Balboa Water Group VGB 2008 179 GPM Suction Flow User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories for water Balboa-water-group VGB 2008 179 GPM Suction Flow