Balboa-water-group Hand Held Jet For Magna Series User Manual download pdf

88-4046, Rev B June 17, 2009

HAND HELD JET FOR MAGNA SERIES INSTRUCTIONS

1. Turn off circulation pump.

2. Remove eyeball (#7) or ﬂowpath (#8 or #9) from the jet by pulling on snout of eyeball or ﬂowpath

spout. **It may be easier to remove therapy option with pump running and jet open. Block outlet

with index ﬁnger and pull on snout of eyeball (#7) or ﬂowpath (#8 or #9).

3. Insert the adapter (#1) ﬁrmly into the jet. Rotate the adapter (#1) counterclockwise approximately

until it clicks. TO REMOVE THE ADAPTER (#1), turn it counterclockwise approximately 1/8 of a

turn or 45

and pull straight out.

4. The hole on the ﬂoat (#3) must be above the water level to draw air.

5. Start the circulation pump.

6. Squeeze the trigger (#2) to start the hand held jet (#4) and release the trigger (#2) to stop it. If you

do not get water ﬂow through the hand held jet, rotate the jet handle (#10) 90° to be sure jet is open.

TO CHANGE THERAPY OPTION IN HAND HELD JET:

Insert cage and eyeball (#5) (or ﬂowpath #6) into hand held jet (#4) by pressing ﬁrmly to snap into place.

1. ADAPTER

2. TRIGGER

3. FLOAT

4. HAND HELD JET

5. CAGE & EYEBALL ASSEMBLY

6. DUAL PORT FLOWPATH

7. EYEBALL ASSEMBLY

8. DUAL PORT FLOWPATH ASSEMBLY

9. SINGLE PORT FLOWPATH ASSEMBLY

10. MAGNA SERIES JET HANDLE

Page 1

88-4046, Rev B June 17, 2009HAND HELD JET FOR MAGNA SERIES INSTRUCTIONS 1. Turn off circulation pump. 2. Remove eyeball (#7) or ﬂowpath (#8 or #9) f

No comments

Balboa-water-group Hand Held Jet For Magna Series User Manual