Balboa-water-group 1 Air Control User Manual download pdf

1” AIR CONTROL INSTRUCTIONS

The correct hole size for the 1” air control is 1-3/4”

Before drilling hole to install the air control, make sure mounting surface is ﬂat. This will help assure 1.

the best seal.

Drill one 1-3/4” hole for the air control.2.

Remove nut (#4) and gasket (#3) from air control. 3.

Place silicone on backside of ﬂange of air control body (#2) and install air control through hole in 4.

spa/bathtub.

Place gasket (#3) onto body (#2) on the outside of spa/bathtub. 5.

Hand tighten nut (#4) onto body (#2). 6.

Remove excess silicone from around ﬂange of air control and surface of spa/bathtub. 7.

Glue 1” pipe to bottom of air control. 8.

DO NOT USE ANY TYPE OF PETROLEUM BASED LUBRICANTS ... THEY WILL DAMAGE THE

PRODUCT.

#1 1” AIR STEM ASSEMBLY 30-2108

#2 1” AIR BODY ASSEMBLY 30-2107

#3 1” GASKET 30-3705

#4 1” NUT 30-3706

88-2100 Rev C July 1, 2009

1” AIR CONTROL INSTRUCTIONS 1

Summary of Contents

Page 1 - 1” AIR CONTROL INSTRUCTIONS

1” AIR CONTROL INSTRUCTIONSThe correct hole size for the 1” air control is 1-3/4”Before drilling hole to install the air control, make sure mounting s

Comments to this Manuals

No comments

Balboa-water-group 1 Air Control User Manual

Browse online or download User Manual for Accessories for water Balboa-water-group 1 Air Control. Balboa Water Group 1 Air Control User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Accessories for water Balboa-water-group 1 Air Control